1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Virtual Memory crash

Discussion in 'Archive' started by Fenris, Aug 17, 2012.

Thread Status:
Not open for further replies.
  1. Fenris

    Fenris User

    Joined:
    03.12.11
    Messages:
    607
    Likes Received:
    6
    ok could u tell me what to do step by step - i will provide u with all date :)

    and here is error i get - [​IMG]


    the most interesting part is thati got a lot more ram than it shows here :/
     
  2. lonewolfGR

    lonewolfGR User

    Joined:
    25.07.12
    Messages:
    67
    Likes Received:
    0
    that is the virtual memory, not ram. also this is not a disconnect issue(network related) but an application crash issue.
    try this:

    windows 7
    start -> right click on computer -> properties -> advanced system settings -> settings(performance) -> advanced -> change -> uncheck first option, and set a custom size for your hard drive.
    let us know the current value, then try to increase it. this number depends on your hard drive space etc(more info about it here: http://en.wikipedia.org/wiki/virtual_memory)

    this solution has also being suggested on instruction forums, step 2:
    https://forum.4game.com/showthread.php?t=864
     
  3. Fenris

    Fenris User

    Joined:
    03.12.11
    Messages:
    607
    Likes Received:
    6
    ok thx for info when i wil lcoem back to my flat i will do it and tell u about results ... btw what number i need to write in custom ?
     
  4. lonewolfGR

    lonewolfGR User

    Joined:
    25.07.12
    Messages:
    67
    Likes Received:
    0
    well that depends on your computer's ram and disk space.
    i was also getting the same crash, until i increased the virtual size to 20gb and haven't noticed any issues since.

    also, from microsoft help:

    "if you receive warnings that your virtual memory is low, you'll need to increase the minimum size of your paging file.
    windows sets the initial minimum size of the paging file equal to the amount of random access memory (ram) installed on your computer plus 300 megabytes (mb),
    and the maximum size equal to three times the amount of ram installed on your computer. if you see warnings at these recommended levels, then increase the minimum and maximum sizes."


    p.s: i moved your posts from the original topic: random lag/disconnects since your crash is not network related so we can help you with your problem better.
     
    Last edited by a moderator: Aug 19, 2012
  5. Fenris

    Fenris User

    Joined:
    03.12.11
    Messages:
    607
    Likes Received:
    6
    hey here u go - my hdd space

    so what iu need to put in custon vindow ? -

    [​IMG]
     
  6. lonewolfGR

    lonewolfGR User

    Joined:
    25.07.12
    Messages:
    67
    Likes Received:
    0
    check what is the recommended size and add 10gb to that. then restart your computer and let me know if you the problem is fixed.
     
  7. Fenris

    Fenris User

    Joined:
    03.12.11
    Messages:
    607
    Likes Received:
    6
    where i can check what is recomended size ?
     
  8. lonewolfGR

    lonewolfGR User

    Joined:
    25.07.12
    Messages:
    67
    Likes Received:
    0
    go to the virtual memory menu by following the path i showed you on previous post and you find it there:

    [​IMG]
     
  9. Fenris

    Fenris User

    Joined:
    03.12.11
    Messages:
    607
    Likes Received:
    6
    ok i made smthign like that ... ok ?

    [​IMG]
     
  10. RedWind

    RedWind User

    Joined:
    25.02.12
    Messages:
    551
    Likes Received:
    46
    hi lonegr :d maczeta/lorion here :d link was crash >>>>
     
  11. lonewolfGR

    lonewolfGR User

    Joined:
    25.07.12
    Messages:
    67
    Likes Received:
    0
    yes, only do it for the hard drive were l2 is installed.
     
  12. RedWind

    RedWind User

    Joined:
    25.02.12
    Messages:
    551
    Likes Received:
    46
    <how much ram do you have you must have min and max same>
     
    Last edited by a moderator: Aug 20, 2012
  13. Fenris

    Fenris User

    Joined:
    03.12.11
    Messages:
    607
    Likes Received:
    6
    so if i have 12 gb ram i need to put 12gb in max and min window ? or add 10 gb more like i did to make it 22 gb ?

    so in others drives i can put "controlled by sytem" yes ? liek i did here :
    [​IMG]
     
  14. lonewolfGR

    lonewolfGR User

    Joined:
    25.07.12
    Messages:
    67
    Likes Received:
    0
    you can add as much as you like. recommended is set by windows, as i typed it is calculated like that:

    "windows sets the initial minimum size of the paging file equal to the amount of random access memory (ram) installed on your computer plus 300 megabytes (mb),
    and the maximum size equal to three times the amount of ram installed on your computer."

    i was still crashing with recommended settings so i added like 8gb more.
    yes, your other drives should be controlled by system.

    good luck.
     
  15. Fenris

    Fenris User

    Joined:
    03.12.11
    Messages:
    607
    Likes Received:
    6
    so now it is ok ? yes ? :d

    thx foe help
     
  16. lonewolfGR

    lonewolfGR User

    Joined:
    25.07.12
    Messages:
    67
    Likes Received:
    0
    Last edited by a moderator: Aug 21, 2012
  17. Razzly

    Razzly Banned

    Joined:
    17.12.11
    Messages:
    2,463
    Likes Received:
    253
    its usually not good when its recommended by windows. depends what win u have.

    to get it right use this:

    virtual memory = ram memory * 2;

    remeber to choose good hd (its best whend its ssd) where u have enough free memory
     
Thread Status:
Not open for further replies.